Preparation of synthetic rutile from high titanium slag using microwave heating

In this work, we demonstrate a novel synthesis of synthetic rutile from high titanium slag. This rutile TiO₂ was obtained by a simple one-step microwave roasting route. The influence of microwave roasting temperature and duration on the phase transformation of high titanium slag has been assessed. X-ray diffraction (XRD) results indicate that the intensity of anosovite (Fe₃Ti₃O₁₀) phase, which were the major phase of high titanium slag of carbon thermal reduction of ilmenite ores, decreased rapidly while the peaks for rutile TiO₂ phase increased with increase in the microwave roasting temperature. The scanning electron microscope (SEM) images revealed formation and the particle-size distribution of rutile TiO₂ phase. Based on XRD and SEM analysis, confirmed the dependence of phase structure, composition and crystallite size on the process conditions of microwave roasting.     

金红石TiO_2中本征缺陷扩散性质的第一性原理计算

基于密度泛函理论的爬坡弹性带方法,对金红石相二氧化钛晶体中钛间隙、钛空位、氧间隙、氧空位4种本征缺陷的扩散特征进行了研究.对比4种本征缺陷在晶格内部沿不同扩散路径的过渡态势垒后发现,缺陷扩散过程呈现出明显的各向异性.其中,钛间隙和氧间隙沿[001]方向具有最小的扩散势垒路径,激活能分别为0.505 eV和0.859 eV;氧空位和钛空位的势垒最小的扩散路径分别沿[110]方向和[111]方向,激活能分别为0.735 eV和2.375 eV.     

高温氧气热处理对TiO_2晶体结构和铁磁性的影响

金红石TiO_2晶体先在真空中进行退火处理,随后在1173 K的氧气中进行不同时间(2 h、5 h、8 h)的热处理.理论上,通过Doppler程序计算了晶体中存在单空位、双空位和间隙O原子时的正电子湮没寿命.实验上,利用正电子湮没寿命谱仪、符合多普勒能谱仪和超导量子干涉仪分别表征了氧气退火后晶体内部的缺陷结构和常温铁磁性.分析结果得出:真空退火晶体的常温铁磁性主要与O空位的存在相关联;而经过氧气退火后,虽然极大地减少了氧空位,但晶体中却产生了大量的Ti双空位,这使得晶体的常温铁磁性有所增加.     

New method to synthesize mesoporous titania by photodegradation of surfactant template

Mesoporous titania has been successfully synthesized by photodegradation removal of cetyltrimethylammonium bromide as the surfactant, after slow hydrolyzation of titanium(IV) isopropoxide. Fourier transform infrared spectra proved that photodegradation has successfully decreased the peak areas of the alkyl groups from the template. The nitrogen adsorption analysis showed that the pore size and the specific surface area of the mesoporous titania were 3.7 nm and 203 m² g⁻¹, respectively, proving the mesoporosity of the titania obtained with the existence of the interparticle mesoporosity which was confirmed by transmission electron microscopy. Based on X-ray diffraction results, the mesoporous titania obtained was in the form of crystalline anatase phase. Furthermore, results from the diffuse reflectance ultra violet-visible spectra showed that the composition of tetrahedral titanium(IV) was more than the octahedral titanium(IV). When the mesoporous titania obtained was used as a catalyst in the oxidation of styrene, an improvement in the conversion of styrene (38%) was observed when compared to those obtained using Degussa P25 TiO₂ (14%) as the catalyst.     

DFT calculations for Au adsorption onto a reduced TiO2 (110) surface with the coexistence of Cl

Residual chlorines, which originate from HAuCl₄, enhance the aggregation of gold (Au) nanoparticles and clusters, preventing the generation of highly active supported Au catalysts. However, the detailed mechanism of residual-chlorine-promoted aggregation of Au is unknown. Herein to investigate this mechanism, density functional theory (DFT) calculations of Au and Cl adsorption onto a reduced rutile TiO₂ (110) surface were performed using a generalised gradient approximation Perdew, Burke, and Ernzerhof formula (GGA–PBE) functional and plane-wave basis. Although both Au and Cl atoms prefer to mono-absorb onto oxygen defect sites, Cl atoms have a stronger absorption onto a reduced TiO₂ (110) surface, abbreviated as rTiO₂ (110) in the following, than Au atoms. Additionally, co-adsorption of a Cl atom and a Au atom or Au nanorod onto a rTiO₂ surface was investigated; Cl adsorption onto an oxygen defect site weakens the interaction between a Au atom or Au nanorod and rTiO₂ (110) surface. The calculation results suggest that the depletion of interaction between Au and rTiO₂ surface is due to strong interaction between Cl atoms at oxygen defect sites and neighbouring bridging oxygen (O^B) atoms.     

硫和银共掺杂介孔TiO2的制备、表征及其对染料的光催化降解活性

以P123为模板,以钛酸四正丁酯、硝酸银和硫脲为原料采用模板法制备了一系列硫和银共掺杂介孔TiO₂光催化材料．利用SEM、XRD、BET和紫外-可见光谱等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征．以甲基橙溶液的光催化降解为模型反应,考察了不同掺杂量的样品在紫外和可见光下的光催化性能．结果表明,用模板法制备的共掺杂介孔TiO₂光催化材料在紫外和可见光条件下较纯介孔TiO₂和单掺杂介孔TiO₂对甲基橙溶液具有更好的光催化降解效果, 且硫和银的掺杂量及样品焙烧温度显著影响该材料的催化性能．当硫掺杂量为2mol%和银掺杂量为1mol%,在500 oC 焙烧2 h所得光催化材料的催化性能最佳,4 h即可使甲基橙的降解率达98.8%,重复使用4次仍可使甲基橙的降解率保持在87.5%以上     

Controllable synthesis of titania/reduced graphite oxide nanocomposites with various titania phase compositions and their photocatalytic performance

A facile method is presented for preparing TiO2 /reduced graphite oxide(RGO) nanocomposites with phase-controlled TiO2 nanoparticles via redox reaction between the reductive titanium(Ⅲ) precursor and graphite oxide(GO),and a series of TiO2 /RGO composites with various TiO2 phase compositions were obtained.In all the titania/RGO composites,the TiO2 nanoparticles were uniformly distributed on the surface of the RGO.The TiO2 consisted of anatase phase particles in the form of square-plates with edges less than 10 nm and the rutile phase nanorods in diameters less than 10 nm.The performances of the as-prepared TiO2 /RGO composites were investigated on catalytically degrading phenol under visible light irradiation.The TiO2 /RGO composites can effectively degrade phenol under visible light irradiation,and the phase composition of TiO2 in the composites significantly influences the activities of these catalysts.     

二维氧化钛纳米页

单层氧化钛纳米页(titania nanosheets)是一种厚度仅为0.7 nm的新型二维纳米材料,具有许多不同于块体氧化钛的优异性质,如:高各向异性、单晶性质、胶体和聚电解质特性、大比表面积、高表面能和量子尺寸效应等。在光电转换、磁光效应、高介电常数器件、电化学能量储存、湿敏传感器、自清洁和光催化等领域极具应用前景。本文首先总结了氧化钛纳米页的基本性能,如:光吸收性能、光致发光性能、光电化学性能、光诱导亲水性能和晶相转变温度差异等,概述了氧化钛纳米页的制备及组装方法,接着分别以薄膜片、纳米管、中空微球、超薄多层复合薄膜为代表,介绍了氧化钛纳米页组装得到的新型材料及其特点,然后介绍了氧化钛纳米页的掺杂改性,从拓宽光吸收带边、提高电子迁移速率和提高磁光效应三个角度,归纳总结了离子掺杂与氧化钛纳米页性能之间的关系,最后对氧化钛纳米页未来的研究发展趋势提出了展望。     

磷掺杂锐钛矿二氧化钛能带结构的从头计算研究

用密度泛函方法优化了锐钛矿二氧化钛及其磷掺杂锐钛矿二氧化钛的晶体结构.研究揭示了用超胞模型研究未掺杂和P掺杂锐钛矿TiO2能带结构和态密度的可行性.计算结果对于提高TiO2光催化活性有意义.     

二维六方p6mm有序介孔WO_3-TiO_2复合材料的制备及其可见光光催化性能

以非离子型表面活性剂为模板剂,采用蒸发诱导自组装法制备了一系列不同WO3含量的有序介孔WO3-TiO2复合材料,并表征了其孔结构、形貌、孔隙率、光谱性质及组成.结果表明,该材料呈二维六方p6mm对称和锐钛矿晶相结构;与无序WO3-TiO2复合材料相比,其比表面积(152～154m2/g)更大,孔径更均一(5.3nm),且比纯TiO2的帯隙宽度(3.0eV)更窄.将该WO3-TiO2样品用于可见光光催化降解水相中罗丹明B和2,4-二氯苯氧乙酸的反应中,发现WO3含量适当的有序介孔WO3-TiO2样品的光催化活性比无序的样品和纯TiO2的更高.